TeamNoWet.Com

Home :: F.A.Q. :: Distributor Opportunities :: Contact :: Detailing :: Purchase No-Wet

environment

quality

find a dealer

testimonials

mitch@teamnowet.com

Link Detour
Fossil Cars - Antique Autos
RV Zone

Detailing - Some Helpful Hints

Park your vehicle in a shaded area. To allow NO-WET time to lift and emulsify the dirt and grime on the paint surface, avoid applying NO-WET in direct sunlight.

Use two clean 100% cotton terry cloths-one for cleaning and one for buffing. DO NOT use a cotton/poly blend, because synthetic fibers can potentially do damage to your vehicle's finish.

Use Common Sense! If an area of the vehicle is caked and packed with dirt, knock off the excess before applying NO-WET.

Application Tips

Shake bottle vigorously for 10 to 20 seconds.
Pour NO-WET into the exclusive Micro-Mist applicator to the fill line.
"Pump" the cap until resistance is felt (cap will rise up about 1/2 inch). Continue to pressurize the applicator during application over the entire vehicle.
Lightly spray a clean, dry 100% cotton towel with NO-WET to add some moisture to the towel.1
Spray a light coat of NO-WET onto the surface of the vehicle, using a sweeping motion, and covering about 2 to 3 square feet each time.
Wait 5 to 10 seconds to allow NO-WET time to emulsify and lift the dirt from the surface of the vehicle.
Gently wipe the vehicle with the damp towel in one direction to remove the dirt and grime.
As a filmy haze appears, use a second dry 100% cotton towel to buff to a clean shine.

Remember-LESS is BEST, especially on glass! For an average-sized vehicle, expect to use no more than 2 to 3 ounces per car wash, unless the vehicle is especially dirty.

Post-Application Tips

To launder your soiled towels, clean as usual. However, DO NOT use fabric softener or dryer sheets, as these products will make the towels less absorbent.

Now, sit back and enjoy the compliments you'll receive for having that show-room look!